 |
|
 |
| |
| Home > Asbestos > CAF Jointings |
|
| |
| WAUDCO |
|
| |
 A good quality general purpose jointing material developed for low and medium stress conditions, Suitable for complete sealing of steam, water, air and various mild alkaline chemicals. Extensive application in plant maintenance, for wide range of services in all industries. |
| Temperature |
Recommended Max. 380° C |
| Pressure |
Recommended Max. 35 Kg/cm2 |
| Specification Compliance |
IS 2712 - 1979 grade W/3
IS 2712 - 1971 grade 'C' |
| Color |
Red generally; On demand graphited. |
| Printed |
Black all over one side generally. |
| Available Sheets |
1590 mm x 2000 mm + 5% & 3180 mm x 2000 mm + 5% |
| Thickness |
0.4 mm, 0.75 mm, 1.5 mm, 3.0 mm, (Other thicknesses on request, Subject to minimum manufacturing quantity). |
| WAUDCO METALLIC is available with wire gauge insertion in thickness of 0.75 mm, 1.5 mm, 3.0 mm, and is suitable for: |
| Temperature |
Recommended Max 415° C |
| Pressure |
Recommended Max 45 Kg/cm2 |
|
|
| WAUDCO EXTRA |
|
| |
 A good jointing material developed with selected asbestos fibre for moderate service providing excellent sealing strength and heat resistance for medium stresses, and is suitable to seal off water, stream, air, saline solutions, alkalies, ammonia and mildly aggressive media. |
| Temperature |
Recommended Max. 440° C |
| Pressure |
Recommended Max. 80 Kg/cm2 |
| Specification Compliance |
IS 2712- 1979 grade W/2
IS 2712- 1971 grade 'C' |
| Color |
Red generally; On demand graphited. |
| Printed |
Black all over one side generally. |
| Available Sheets |
1590 mm x 2000 mm + 5% & 3180 mm x 2000 mm + 5% |
| Thickness |
0.4 mm, 0.75 mm, 1.5 mm, 3.0 mm, (Other thicknesses on request, Subject to minimum manufacturing quantity.) |
|
| WAUDCO EXTRA METALLIC is available with wire gauge insertion in thickness of 0.75 mm, 1.5 mm, 3.0 mm, and is suitable for : |
| Temperature |
Recommended Max 460° C |
| Pressure |
Recommended Max 90 Kg/cm2 |
|
|
| WAUDITE |
|
| |
 A Good quality moderate service compressed asbestos jointing recommended for use against dry and wet steam, water, gases, alkalies, oil at normal temperatures, chemicals, and fuels, etc. Extensively used for application in maintenance, services in all Industries. |
| Temperature |
Recommended Max. 460° C |
| Pressure |
Recommended Max. 80 Kg/cm2 |
| Specification Compliance |
IS 2712 - 1979 grade W/2
IS 2712 - 1971 grade B/C
B.S. 2815 - 1973 grade A |
| Color |
Red generally; on demand graphited. |
| Printed |
Black all over one side generally. |
| Available Sheets |
1590 mm x 2000 mm + 5% & 3180 mm x 2000 mm + 5% |
| Thickness |
0.25 mm, 0.4 mm, 0.75 mm, 1.5 mm, 3.0 mm, (Other thicknesses on request, subject to minimum manufacturing quantity.) |
|
| Waudite Metallic is available with wire gauge insertion in thickness of 0.75 mm, 1.5 mm, 3.0 mm & suitable for : |
| Temperature |
Recommended Max 480° C |
| Pressure |
Recommended Max 100 Kg/cm2 |
|
|
| SUPER WAUDITE H.P. |
|
| |
 A super quality jointing compose of carefully selected Chrysotile asbestos fibre with a specially compounded heat-resisting synthetic rubber binder. Used mainly on steam services and conditions where reliability at high temperature and pressure is demanded. Also good resistance to a wide range of oils, Alkalies, Chemicals, Petroleum distillates and solvents. This grade is widely used in marine engines, electricity generating sets, etc. |
| Temperature |
Recommended Max. 550° C |
| Pressure |
Recommended Max. 160 Kg/cm2 |
| Specification Compliance |
IS 2712- 1979 grade W/1
IS 2712- 1971 grade A/S
B.S. 2815- 1973 grade A |
| Color |
Red generally; On demand graphited. |
| Printed |
Black all over one side generally. |
| Available Sheets |
1590 mm x 2000 mm + 5% & 3190 mm x 2000 mm + 5% |
| Thickness |
0.25 mm, 0.4 mm, 0.75 mm, 1.5 mm, 3.0 mm, (Other thicknesses on request, subject to minimum manufacturing quantity.) |
| Super Waudite Metallic is available with wire gauge insertion in thickness of 0.75 mm, 1.5 mm, 3.0 mm & suitable for: |
| Temperature |
Recommended Max 600° C |
| Pressure |
Recommended Max 180 Kg/cm2 |
|
| Super Waudite Metallic is available with wire gauge insertion in thickness of 0.75 mm, 1.5 mm, 3.0 mm & suitable for: |
| Temperature |
Recommended Max 600° C |
| Pressure |
Recommended Max 180 Kg/cm2 |
|
| |
|
| |
|
|
|
 |
|
 |
|
|
